The ball mill is used to mill sand, fly ash, tailings, and similar raw materials into fine material so that the slurry can meet the process standard used in AAC production. In the raw material processing section, it is arranged together with conveying, storage, and feeding equipment so that wet or d...

The belt scale is used in the conveyor system to monitor the flow rate of material and to ensure the accuracy of the totalized weight output. In the raw material processing section, it is used during material conveying so that batching can be carried out in the required proportion.

The powder material silo is used for storing powdered raw materials in the AAC production line. It is suitable for storing dry particles and powders, and the page states that it can effectively prevent the mixing of moisture and dirt during storage.

The knife valve is designed mainly for on-off and isolation under silos. In the raw material processing section, it is used in powder material discharge points where flow needs to be opened, closed, or isolated before the material moves to the conveyor.

The slurry agitator is used together with the transition slurry pool next to the slurry storage tank. This transition slurry pool serves two functions in the slurry transfer and connection part of the raw material processing section.

The slurry storage tank is used after the ball mill stage to store prepared slurry before it is transferred further in the AAC process. The slurry is pumped into the tank and kept in motion so that sedimentation can be avoided during storage.

The belt conveyor is an important material conveying equipment for the autoclaved aerated concrete block and panel production line. It has big conveying capacity, simple structure, easy maintenance, and standardized components, making it suitable for regular material transfer in the raw material pro...

The bucket elevator is an important material conveyor system for the AAC block and panel production line. It is suitable for vertical conveying duties where large capacity and elevating height are needed in the raw material processing section.

The jaw crusher is an important machine for the raw material preparation section of the AAC production line. It is mainly used to crush lime into smaller particles for AAC production, so it serves as a primary crushing unit before further material handling or milling.

The dust collector is used as a dust collecting device at the top or bottom of various storehouses, silos, and conveying machines. In the AAC production line, it serves the raw material processing section by collecting dust at key handling points.

The anticorrosive liquid dipping and drying system is used in the steel mesh fabricating and circulating section to treat assembled frames and cages before they move to the next step of AAC panel production. The dipping hoister carries the assembled frames and cages into the anticorrosive liquid tro...

The mesh welding machine is used to weld straightened steel bars into steel mesh automatically for AAC panel production. It is a machine for preparing the steel mesh used in the panel process. In this section of the line, the equipment supports the conversion of straightened steel bars into mesh ass...

The wax-dipping lifting device is used to lift the assembled steel mesh together with the steel pin and immerse them in a wax dipping pool. this process prevents slurry from adhering to the steel pin after demolding. The related transfer process includes steel mesh sheets or cages are immersed in so...

The mesh assembly frame conveyor line is described on the system as a circulation transmission system. this line consists of a mesh assembly frame rack, a mesh assembly frame ferry cart, and other related devices. In the steel mesh fabricating and circulating section, this arrangement provides the t...

The AAC automatic networking workstation, is designed for automatic networking operations in AAC panel production. The workstation was developed over two years and combines automatic grasping orientation and arrangement of material, soldering, automatic card buckle handling, automatic cycle of mesh,...

The inserting and drawing out hoist is used for transporting the frame with steel mesh in the AAC panel production process. the assembled steel frame or steel cage is inserted into the mould and then pulled out of the mould by the hoister. It also explains that the accuracy of the hoister affects th...

The pouring mixer is one of the core equipment in the AAC block machine. Weighted slurry, waste slurry, water, cement, lime and aluminum paste are added into the mixer in sequence. The machine mixes these materials at high speed so that the slurry becomes a uniform mixture with a certain density bef...

Aluminum powder is measured according to a set value and then put into the pouring mixer automatically. In the AAC production line, this system is used as a blending machine to mix the aluminum powder with the slurry. Teeyer supplies a simple type based on manual weighing and feeding, as well as a t...